Unless over an extensive ground system and avoiding to elevate the antenna
from ground, a vertical array on 10m will not have a consistent energy
radiated at very low angles and no signal enforcement at any elevation
because of ground reflections.
In the other hand, there are moments where a wide coverage of elevation
angles and the capability to vary beam in a short time can be useful in
spite of the cited gaps.
----- Original Message -----
To: <email@example.com>; <K3BU@aol.com>
Sent: Monday, March 19, 2001 5:58 PM
Subject: Re: [TowerTalk] problems with 10m COMTEK 4 sq unit
> In a message dated 3/19/01 8:55:23 AM Pacific Standard Time,
> firstname.lastname@example.org writes:
> > I have a 4 square on 10 meters with the Comtek hybrid and it works
> Okay, I'll bite. What was your rationale for building one for 10M?
> 160, 80 and 40 versions are plentiful, I haven't heard of one for 10M.
> advantages would it have on 10M where yagis are fairly cheap and
> Cheers, Steve K7LXC
> Tower Tech
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com