Try that it sand! :-)
73 Dwight W9YQ
----- Original Message -----
Sent: Tuesday, March 20, 2001 8:32 AM
Subject: Re: [TowerTalk] Tower Base Construction
> I have a US Tower TX-455 crank-up / fold over that I
> (I do contests in the unassisted catagory and didn't want
to take a chance.)
> The ground here is very good to dig into - no rocks, very
> I dug the hole using a sharpshooter (thin, long shovel), a
> (to get the dirt out of the hole), a shovel without the
handle (for the
> bottom), a bucket and a ladder. Also had the XYL check on
me fairly often to
> be sure I didn't bury myself.
> I busted the ground up and squared the edges with the
> the earth with the posthole digger, shovel and bucket. And
even got a few low
> spots in my yard filled in with the dirt from the hole as
> It only took 3 or 4 days (long days) to dig the hole --
many were impressed
> how square it was (including the guy in the concrete
> This was a LOT of HARD work! I wanted to do another one
when I finished!
> Makes you feel pretty good to complete a job that most
everyone else says
> can't be done. My buds were adamant that I should get a
backhoe or auger --
> the logic being that you can't dig a hole that deep and
narrow by hand.
> The only bad news for the entire project was that the
concrete truck really
> left some big ruts in the yard and busted a sidewalk.
> Bottom line : It can be done -- just depends on how bad
you want it.
> 73, Don K4BEV
> P.S. Although there is some danger involved, I never had
even a hint of cave
> in while doing this. I always had a line tied to me and to
a block about 15'
> from the hole, just in case. Having a lookout posted
topside should be
> FAQ on WWW:
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com