We cut all cables by first taping section to be cut, then use a large, sharp
cold chisel and hammer. Use a steel back up plate.
----- Original Message -----
From: "Tom Rauch" <firstname.lastname@example.org>
To: <K7LXC@aol.com>; "George Fremin III - K5TR" <email@example.com>
Cc: <firstname.lastname@example.org>; <email@example.com>
Sent: Thursday, March 29, 2001 2:04 PM
Subject: Re: [TowerTalk] Grips vs. clamps?
> > > For cutting EHS, put a wrap or two of electrical tape on the
> > > spot where
> > > you want to make the cut and use a hand-grinder or skilsaw with a
> > > metal cutting aggregate blade to make the cut. The tape'll keep the
> > > strands together.
> > I find bolt cutters are much easier, faster and safer to use
> > when cutting EHS.
> I'll vote for that!
> Bolt cutters are MUCH safer and faster. A decent bolt cutter will
> cut EHS just fine with minimal effort and time.
> 73, Tom W8JI