[Top] [All Lists]

[TowerTalk] Champion and Trylon Towers

To: <>
Subject: [TowerTalk] Champion and Trylon Towers
From: (Wes Cosand)
Date: Sun, 01 Apr 2001 13:02:56 -0400

These towers are made by Trylon, a Canadian company which has been in this 
business for quite a while.  I put up a 64 foot version in 1989 and 
although I recently sold the QTH, I was very satisfied with the 
tower.  Yes, they are an excellent value for the money.  It is a tapered 
tower in 8 foot sections and you simply select the particular sections to 
give you the height and the wind loading capacity that you need.  Champion 
and Texas Towers are distributors to the ham community.

There might be two disadvantages.  The first is that the braces slant so 
that some people dislike climbing the angled braces.  This never bothered 
me if I wore a stiff soled shoe to climb.  The second is that the tower is 
bolted together and I suppose one should be alert for a bolt that could 
loosen because of flexing but I never saw that.  I did have a little 
trouble torquing the bolts correctly when I assembled it because the 
galvanizing "lubricated" the bolt enough that I would sometimes snap the 
bolt in half. The tower is usually shipped on a large 8 foot pallet but I 
think you can get it broken down to the individual components for shipping 

I assembled the tower with a gin pole and it went up in two or three hours 
but if I were doing it again, I would assemble it on the ground, insert the 
mast and rotor, and hire a boom truck to set it on the base.

What you get is a strong tower with the capacity to put up a large beam in 
a self-supporting tower.  The lack of guys was the determining factor for 
my wife.  And I have sufficient motivation to for her to be happy.  There 
are more important things in life than even my tower!

Take a look at

Wes, WZ7I

At 05:51 01/04/01 , you wrote:
>I've been looking at various towers, with future
>plans to put up a large Force beam.
>I have had a 60-foot heavy duty Aluma tower for
>about 20 years and it has been doing fine. It now
>holds a TH-11-DXX. Now thinking about another
>self-supporting tower (with house bracket).
>Has anyone had any experiences with Champion's
>96-foot self-supporting tower, for $1,999. This
>tower sounds almost too good to be true, anyone
>have one of these? What have your experiences
>Dave Kaiser, AL7HG
>Dave Kaiser
>P.O. Box 574
>Dhahran, Saudi Arabia
>(9663) 874-7616
>Do You Yahoo!?
>Get email at your own domain with Yahoo! Mail.

Wes Cosand, PhD
6299 Durham Rd; Rt 413
PO Box 349
Pipersville, PA 18947-0349
Phone: 215-766-3842
FAX:   215-766-3843

<Prev in Thread] Current Thread [Next in Thread>