[Top] [All Lists]

[TowerTalk] Petrezewski (sp?) array ..

To: <>
Subject: [TowerTalk] Petrezewski (sp?) array ..
From: (George Fremin III - K5TR)
Date: Thu, 5 Apr 2001 09:32:13 -0700
On Thu, Apr 05, 2001 at 02:33:17PM +0100, Bill Tippett wrote:
> W8JI:
> >While that system probably works, with proper selection of feedline 
> >lengths or use of baluns there would be no need to switch the 
> >shield. 
>         If I recall correctly, the feedlines must be open-circuit (OC)
> because ~3/8 wavelength OC adds inductance to make the undriven elements
> look like parasitic reflectors in the system.  I guess they could be
> made ~5/8 wavelengths and shorted if you didn't mind the cost of another
> 1.25 Vf wavelengths of coax (5 X .25 wavelengths X Vf).  I would still
> worry about what is happening in the system if the shield is grounded
> to the tower and all other shields (driven and undriven).  The modeling
> probably only considers the undriven dipoles as reflectors and not part
> of a complex system with shields of everything tied together.

I have used several systems similar to this on 80 and 160.  While the 
above might be true it is something that I have never really
worried about too much since the antennas seemed to work quite well.

At N5AU we put up a system that was sorta based on this - we even
cut the feedlines so they would be 3/8 wave long.  We also used
a switchbox that did not ground the center conductor of the feedlines.

We had a 190' 25g tower guyed six times with unbroken steel guy wire.
We used three sloping dipoles from the 180' level - each sloper 
bisected the guy angles so we had antennas sloping NE, SE and W.

Here is a photo of that tower:

The yagis are Cushcraft 40 meter yagis.

This antenna is the most impressive antenna we had at N5AU - it 
had great front to back, it heard well and we had no trouble 
working anything. 

Here is a recording I made of it when I was operating at HR6A.

When I was designing the W5KFT station I decided that we would do something
similar on 80 meters - we have a 150 tower with steel guys on it and 
I put up slopers NE, NW and South.  These antennas have good pattern and 
once again they work very well - while putting up a 4 sq or even using
4 slopers off ther tower to make a 4 SQ might work a bit better it 
sure is hard to beat these simple slopers for performace/cost.  In the 
80 meter system I did not bother to make the feedlines any lenght - I just 
used enough to get back to the switchbox at the base of the tower. 


George Fremin III                 
Johnson City, Texas             "Experiment trumps theory." 
K5TR (ex.WB5VZL)                            -- Dave Leeson W6NL                             

List Sponsor: - Trylon self-supporting towers, safety
equipment, rigging gear, LOOS tension guages & more!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>