I'm in the process of disassembling a TH7 to clean out the traps.
Boy, what a mess in there. You thought grass clippings just
decomposed on the ground? Wrong - they wind up inside the traps!
Anyway, the problem I am having is getting one of those plastic
insulators far enough back inside the trap cover. When they put the
trap together, they dimpled the cover with a punch to hold the
insulators in place. It makes it about impossible to get the insulator
I've tried flattening out the dimple from the inside without success.
Barry Kutner, W2UP Internet: firstname.lastname@example.org
Newtown, PA FRC alternate: email@example.com
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com