Clearly a crane is the SAFEST solution.
That said, here is my experience with a bent water pipe:
I use a water pipe stuck in the ground to assemble (and store)
antennas. I had a couple of 3L20's plus 3L10 and 5L10 on the
top of this mast. A heavy limb blew off a nearby tree, hitting
the boom of the Telrex 3L20, bending the mast over. I merely
grabbed the mast and pushed it back upright without too much
effort. Bottom line: if your tower is guyed near the top, you
MIGHT be able to pull the mast back to vertical without over
stressing the tower. I suspect the strength of water pipe varies
greatly. I confess that I have had a 5L10 riding 7 ft above a
4L15 for at least 15 years on a galvanized water pipe mast.
I checked it before installation by placing a fulcrum 7 ft from
the top, having another person stand on the long end while
I stood on the top end. It did not bend so I went ahead and
used it (successfully). I hope K7LXC doesn't ban me from
TowerTalk for this confession :-).
73 / GL, Tom N4KG
On Mon, 23 Apr 2001 06:37:52 -0400 "Roger D. Johnson" <firstname.lastname@example.org>
> Last year a local ham put up a stacked array on a water pipe mast.
> During a winter storm, it bent about 20 degrees just above the
> on the Rohn 25. He seems to think he can attach a line and bend the
> mast back into line so it will drop through the top section. I don't
> think this stands a chance of working and have advised him to spend
> the bucks and hire a crane. What is the collective wisdom on how to
> handle this situation without getting someone killed or injured.
> Thanks, Roger
> List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
> safety equipment, rigging gear, LOOS tension guages & more!
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com