Towertalk
[Top] [All Lists]

[TowerTalk] coax under a driveway

To: <towertalk@contesting.com>
Subject: [TowerTalk] coax under a driveway
From: k0myw@worldnet.att.net (Mike O'Brien)
Date: Mon, 23 Apr 2001 19:03:40 -0500
Tom,

   It isn't as difficult to tunnel beneath pavement as you might think,
provided the soil isn't chockfull of boulders. Heck, even I have
successfully done it. Here's how:
   Mate your garden hose to a length of pipe (just PVC often is
sufficient) equal to the width of pavement. Dig one-foot-square
(roughly) holes on either side of the pavement as entrance and exit
points. Poke the open end of the pipe into the ground at the entrance
hole, turn on the water and begin pushing and probing, aiming at the
desired exit hole on the other side of the pavement. With luck, the
tunnel will almost dig itself...

        73,
        Mike, KØMYW

Tom Martin wrote:
> 
> I was wondering if anyone knows a way to dig a hole under a concrete
> driveway?  The coax from my tower would either have to be elevated 12
> feet above the driveway , or buried under it.  I am not going to cut a
> path through it!  Doesn't the city lay pipe under sidewalks without
> damaging the existing concrete?
> 
> Thanks,
> 
> Tom W8JWN
> 
> List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
> safety equipment, rigging gear, LOOS tension guages & more!
> http://www.championradio.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>