[Top] [All Lists]

[TowerTalk] choke AND a balun

To: <>
Subject: [TowerTalk] choke AND a balun
From: (
Date: Thu, 26 Apr 2001 10:27:40 +0200
> If your beam uses a balun, can you also wind some of the excess coax 
> a choke just before the balun?

If the existing balun works, the coax choke is totally useless there 
and it's probably better to collect an excess of cable somewhere else.

> Would say 8 turns of about 6" diameter be the proper size?

It depends by the antenna band/s, and by the size of the used cable.
The effective choke reactance is directly proportional with number of 
turns and winding diameter but inversely to the winding lenght.
Reactance is also negatively affacted by capacitance between turns and 
larger cables have more.
An 8 turns choke with RG58 (RG142) will isolate better (higher 
reactance) than 8 turns with RG213. 
A smaller winding diameter requires more turns than a larger one but 
has less stray capacitance and is more effective on highest bands. 

> How close to the balun should it be?

If the conventional balun doesn't work, it's better to remove it.
When used like a balun, a choke should be placed as close as possible 
to the antenna.

Mauri I4JMY

> Thanks

List Sponsor: - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>