On 1 Jun 01, at 6:01, n4kg@juno.com wrote:
> There has been a lot of speculation that the downward
> forces on the base plate would prevent rotation about
> a pier pin. I know of one example where I'm sure there
> was enough torque to rotate about a pier pin.
>
> N4AR has a pair of 200 ft R45 towers with the bottom
> sections in concrete. One of these towers has a 4 high
> stack of CC 4L20's. After a tornado passed by his QTH
> he was cleaning up around the base of the tower when a
> finger went down into a hole. The tower rotated enough
> to SHEAR OFF all 3 legs!
>
> de Tom N4KG
>
Makes me wonder if his guys were properly tensioned.
Barry
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|