The utility companies have nice attachments for adding
guys to their single loop anchors. Another approach would
be to clamp a plate or angle iron with an appropriate size hole
to the rod. Or, make a right angle attachment using boom to
element style construction with 4 U bolts and a flat plate.
A technique I use is to make a strap with small loops in each
end, looped through the anchor eye, using 1/8 inch 7 strand
galvanized steel wire (the old 6/18 guy wire). A nylon harness
could also be used.
de Tom N4KG
On Wed, 13 Jun 2001 20:12:26 -0500 "J. Kincade" <firstname.lastname@example.org> writes:
> I understand the methodology of the Klein grips and comealongs, I
> think, but
> how, exactly, do you attach the lower end of the comealong to the
> guy rod
> shaft without interfering with the equalizer plates, etc.? I'll have
> 3' of 5/8" galvanized rod sticking out of the ground at about a 41
> angle... Maybe I'm making this harder than it is, just because I
> done it yet, but the vision isn't perfectly clear yet.
> And Stan, I believe you.
> 73, Jerry W5KP
> List Sponsor: Are you thinking about installing a tower this summer?
> Call us
> for information on our fabulous Trylon Titan self-supporting towers
> - up to
> 96-feet for less than $2000! at 888-833-3104 <A
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com