On Tue, Jun 19, 2001 at 06:42:59PM -0700, Joe Sloss wrote:
> A friend of mine has a old commercially made 3L 2m quad with the feed point
> at the end of the DE spreader which is currently set up in a "diamond"
> configuration. The feed point cannot be changed. The R, DE, and D
> spreaders are secured w/ set screws and can be rotated around the boom.
> What element configuration is required in order to insure horizontal, rather
> than vertical, polarization for 2m SSB. Thanks for input. Joe K7MKS
For horizontal polaration on a diamond quad, the feed to the DE should
be at the end of one of the vertical spreaders. If the reflector and
director are assymetrical (e.g., there is a stub at one corner) that
should also be aligned with a vertical spreader. It doesn't matter
whether you choose top or bottom, however.
Bob Nielsen, N7XY firstname.lastname@example.org
Bainbridge Island, WA http://www.oz.net/~nielsen
IOTA NA-065, USI WA-028S
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com