In a message dated 6/20/01 10:27:45 AM Pacific Daylight Time,
asfco@nycap.rr.com writes:
> Sava Industries of NJ who specialize in wire rope sheaves do not have
> anything close to the size needed....I discovered that the sheaves are
> all too thick for the application on an EZ Way Tower. US Tower was not
> really even willing to help but did say the pulleys they use are all 5"
> I checked with several other sources all with the same result...
> So I am stumped on this one.......unless someone out there has BTDT
> and lets the rest of us in on where to find these sheaves it looks like
> they would have to be custom
> made
> Anyone else out there with suggestions ???? I know from receiving
> off list inquiries for info that there are more than a handfull of hams
> who are in need of these
I'm not sure what EZ Way used but I can comment on US Tower products. UST
makes their own sheaves and presses off-the-shelf sealed bearings in their
centers. Then they punch the mating surfaces to keep the bearings in the
sheave.
If EZ Way did something like that, you're not going to be able to find
what you need.
BTW the UST ones are fairly expensive but they're the ONLY ONES for the
application.
Cheers, Steve K7LXC
Tower Tech
factory authorized US Tower installer
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|