[Top] [All Lists]

[TowerTalk] Flex coupling for rotators

To: <>
Subject: [TowerTalk] Flex coupling for rotators
From: (
Date: Tue, 3 Jul 2001 08:28:55 EDT
I suspect that eventually the bolt holes holding the sleeve and the mast will 
"worry", and you'll get more and more "slop" in the joints.  You could delay 
the process by using hardened mast material as well as bolts, and maintain 
VERY close tolerances between sleeve and mast.
I suspect that's why universal joints were invented...
73, Bert N4CW

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>