[Top] [All Lists]

[TowerTalk] Mast coatings

To: <>
Subject: [TowerTalk] Mast coatings
From: (J. Kincade)
Date: Mon, 16 Jul 2001 11:43:14 -0500
No heartburn, Eugene. Just take it to them and get your wallet out. :-)
Mine came out great, would have been cheap per mast too if I had 4 or 5 of
them to do. Unfortunately there was a minimum charge to deal with, which
made a single mast about 3 times more expensive to do. I should have done
four and sold the other three to you guys. :-)  I think powder coating is
about as expensive as galvanizing, and I suspect  you'd ruin the powder
coating with U-bolts, saddles, and handling faster than you would mess up a
galvanized surface. My two cents worth.
73, Jerry W5KP

> On 7/12/01 8:34 PM, Eugene Jensen at wrote:
> >I have located 1/4 wall 4130N mast in Pa and don't want to go thought the
> >heart burn of having it galvanized.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>