Towertalk
[Top] [All Lists]

[TowerTalk] Question - Routing of Coax around Rotator Shelf

To: <towertalk@contesting.com>
Subject: [TowerTalk] Question - Routing of Coax around Rotator Shelf
From: pbarkey@bsu.edu (Barkey, Patrick M)
Date: Fri, 20 Jul 2001 10:03:28 -0500
K7LXC wrote:

    While running the cables inside a tower is somewhat handy since the
tower 
acts as a Farraday shield for lightning protection, IMO it's a real pain
in 
the butt to put them inside and takes longer than simply running them 
outside. The vast majority of commercial towers have their cables down
the 
outside.

My reply:

If you live with your tower everyday, you will be thankful for the
extra time you took to put your control cables inside, rather than
outside, the tower.  You're gonna be banging a lot of stuff against
that tower for the next 20 years, and its just one less thing to
worry about.

Commercial practice isn't always so great to follow.  Go see what the
Polyphaser folks have to say about the commercially common practice
of not taking feedline all the way to the ground before routing it
into buildings for an example of another bad habit to be avoided.

   - Pat
     N9RV

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>