[Top] [All Lists]

[TowerTalk] Antenna Modeling Question Update

To: <>
Subject: [TowerTalk] Antenna Modeling Question Update
From: (
Date: Tue, 24 Jul 2001 10:21:07 EDT
In a message dated 7/24/01 6:45:29 AM Pacific Daylight Time, 

> I intend to use either a Rohn 45 or maybe 55 type tower, fully guyed.  I 
>  would probably have to use heavier and stronger guys at the top section 
>  recommended by Rohn.   Don' t know how much to heavy-up.
    I take it from your remark that you don't have a Rohn catalog since it 
spells out all the specs that you asked about; i.e. tower capacity and guy 
sizes. It's mandatory that you have one to help in your planning and 
construction. They're available from  <A HREF="";></A>

    The primary installation planning/building spec is your local county 
windspeed. What is it? That will make most of the decisions for you. You can 
look up the TIA-222 county windspeed ratings at the same website under Tech 

Cheers,    Steve    K7LXC
Champion Radio Products
Tower Tech 

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>