At 08:58 AM 7/26/01 -0400, W8JI wrote:
>I'm planning on using pressure treated 2x4's to support some
>Beverages. I'll just poke some holes in the ground with my tractor's
>post hole digger attachment, and drop the 2x4's in.
>Does anyone have any tips on making the wood last longer, or will
>it be OK in direct contact with soil?? Will it last ten years or so?
Can't say for sure about your soil, but I recently pulled some 4X4 PT (CCA)
fence posts that had been in the ground here for 8-9 years, and they showed
no visible deterioration. I understand that some PT wood now uses a
non-CCA treatment, and I don't know if it is comparably durable.
A much more serious problem is what happens above ground. I have had some
8' 4X4s that warped over almost a 30 degree arc in 6 months. There seems
to be a correlation between the presence of knots and the propensity to
warp, perhaps because of differential absorption of the waterproofing
73, Pete N4ZR
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com