>From: Pete Smith <email@example.com>
>Subject: Re: [TowerTalk] Wood posts
>Date: Thu, 26 Jul 2001 11:40:59 -0400
>At 08:58 AM 7/26/01 -0400, W8JI wrote:
> >I'm planning on using pressure treated 2x4's to support some
> >Beverages. I'll just poke some holes in the ground with my tractor's
> >post hole digger attachment, and drop the 2x4's in.
> >Does anyone have any tips on making the wood last longer, or will
> >it be OK in direct contact with soil?? Will it last ten years or so?
>Can't say for sure about your soil, but I recently pulled some 4X4 PT (CCA)
>fence posts that had been in the ground here for 8-9 years, and they showed
>no visible deterioration. I understand that some PT wood now uses a
>non-CCA treatment, and I don't know if it is comparably durable.
>A much more serious problem is what happens above ground. I have had some
>8' 4X4s that warped over almost a 30 degree arc in 6 months. There seems
>to be a correlation between the presence of knots and the propensity to
>warp, perhaps because of differential absorption of the waterproofing
>73, Pete N4ZR
Very true, Pete. I now remember my father in-law who is a farmer commenting
on how treated lumber is much more likely to warp. He too attributed it to
how it is daily sprayed in a somewhat haphazard manner. Not all treated
wood is the same. I'm surprised yours lasted that long in the ground. It
depends somewhat on the soil.
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com