N4KG comments inserted below.
On Mon, 30 Jul 2001 "WA9ALS - John" <email@example.com> writes:
> I'm interested in this too, so will jump in now. My main question
> now is:
> I have a C31XR at 72 ft - The elements are -not- grounded. Thus I
> assume much less (or none?) capacitance hat effect.
There will be LESS capacitance than if the elements were
grounded. There is still the loading effect of the BOOM
which I assume is electrically connected to the tower.
And don't forget the capacitive coupling between the tower
and the COAX which is connected to the driven elements.
I therefore assume I
> can still work out a shunt feed for -some- frequency(s), but they will
> be higher freq than if I had grounded elements and therefore more
> capacitance at the top?
> What do you think would be reasonable to shoot for with a 70 ft
> tower with the ungrounded elements of the C31? 40M? Maybe 80M?
> Doubt 160M??
Your best solution for 40M is a rotary dipole or 2L40.
You could also short the center of the end elements
to the boom and match the boom as a 40M end loaded
dipole. I have posted my method on this several times.
It's a KILLER. N4KG
You could make separate shunt feeds for both 80 and 160.
An antenna does NOT need to be resonant to radiate.
I have matched a 50 ft tower topped by a TH3 on both
160 and 80M.
de Tom N4KG
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com