Hello, for the first time!
I have a free-standing (not guyed) 3-legged lattice tower which is 90
feet high. It has had a 10 ele HF log periodic at the top for 8 years,
wind load of the antenna is 14 sq. ft. and it weighs about 90 lbs
I have put a TIC-ring at 60 feet (weighs 95 lbs) and want to put
another identical antenna (14 sq. ft. 90 lbs) on this rotor.
I just wondered if anyone could help me to work out whether the tower
can take this load, whether I should consider guying the tower etc.
I have searched the internet and these archives but it is difficult to
know how to proceed.
Kindest regards from Denmark
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com