Hi Tom - thanks for your comments. Disagreements are always welcomed here -
its the only way I can learn something.
The 2WL loop sounds interesting, and could be used by some on the perimeter
of their lots, though the required height might be a problem. How would you
suggest it was fed ? For those who find open line impractical, due to
house-entry etc., is there a way to feed with coax ?
With regard to wire-type, I would recommend people to be on the lookout for
surplus telephone wire, often discarded by linesmen when they are renewing
cables. The stuff here has 4 cores of copper (for the signal), and 6 cores
of steel (for strength) - I use it for my 1WL delta loop on 80, with no
----- Original Message -----
> A 2WL square loop (1/2 WL on each side), fed on the center of
> one side, is an interesting antenna. It acts as two pairs of half wave
> dipoles spaced 1/2 WL and fed out of phase. Each pair of opposite
> half waves gives a bi-directional figure 8 pattern resulting in a nearly
> omni-directional horizontally polarized pattern for the square loop.
> If mounted at 1/2 WL high it is an effective and useful antenna.
> At 20 or 30 ft on 80 or 40M, it SUCKS compared with a higher
> dipole or good vertical.
> Regarding wire size, anything smaller than #18 copper based wire
> is subject to breaking readily from falling limbs or ice loading.
> Tom N4KG
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com