[Top] [All Lists]

[TowerTalk] All band loop

To: <>
Subject: [TowerTalk] All band loop
From: (2)
Date: Wed, 5 Sep 2001 08:50:27 -0700
>> There is another theoretical concept as dirty as it is that when you use
>> longer than 1/4 waves for a 4 square, you may not get as clean a pattern
>> to the higher mutual coupling between them.  I thought that 4 1/2 waves in
>> 4 Sq should give a better pattern.  My preliminary Eznec tries were not
>> good.
>I modeled a 4 square of 1/2 wave verticals on EZNEC and it worked
>fine with one caviat:  if you want to feed the verticals
>at the bottom, you must use voltage sources.  ...

//  I got an SWR=1 to 1 result by matching a  >1000-ohm half-wave curtain 
array to 50-ohms with an L-network.  The delightsome thing about end-fed 
halfwaves is that they work well with even a minimal ground due to their 
relatively high-Z.  

> ...

cheers, Rick

-  R. L. Measures, 805.386.3734,AG6K,  

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>