Definitely one of those things you model to see what it does.
Guarantee that there will be at least one non-intuitive outcome of what
--- Robert Shohet <firstname.lastname@example.org> wrote:
> Hi 4-square fans...
> I currently have an Inv L 4-square on 80 that is around my 130'
> tower. The
> 4-square elements are elevated with elevated radials and the element
> point AWAY from the tower and AWAY from each other.
> Due to space limitations, I am contemplating hanging a pair of phased
> Inv L's from the 115' level on my tower and angling them out away
> from the
> tower and away from the 4-square. The ends of the 160 Inv L's will
> elevated with elevated radials and will be phased with 3/4 wavelength
> coaxial lines. The ends of the 160 elements will be 1/2 wave apart -
> 270'. The ends will be about 100' from the 80 4square InvL elements
> but the
> radials will come closer than that to the 80 4-square radials.
> I think that some pattern degradation might result but I don't think
> should be very serious. Any thoughts on this? There is no other
> alternative for 160 at this qth.
> All help and comments appreciated.
> Many thanks and 73
> Bob KQ2M
73 & GL
Guy Olinger, K2AV
Apex, NC, USA
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com