> question the accuracy of such programs. Such as: can EZNEC or similar
> modeling programs accurately determine which quad array: 1/4 waves,
> 1/2 waves, or 5/8 waves... will outperform the other in real life?
EZNEC, like any other modeling program, is a tool. The results we
get with any tool depend on how well we understand how to use
the tool. This especially includes modeling phased systems, where
the user has a choice of both current or voltage ratios and phase.
The user is the biggest limitation, and persons with deep
understanding of how systems actually work can model "new" or
"unconventional" ideas faster.
For example, people often try to model elements that are not fed at
current maximas in phased arrays the same way they do current
fed elements, using current sources not placed at the current
maxima in the element operating with well known current and
phase ratios. Doing so results in incorrect current and phase
distribution in arrays, and the conclusion often is the array "won't
work" when the modeller is actually at fault.
This common modeling error appears mostly with shunt-fed
elements, or non-1/4wl verticals in phased arrays, and leads to the
old wive's tales that "shunt fed towers can't be phased" or that
"1/2wl verticals won't phase correctly". Even though nothing is
further from the truth. I phased a shunt-fed 1/4wl tower against a
dissimilar height series-fed T antenna and got well over 20dB F/B. I
can also model that system and it works.
Models by nature, are shortcuts but virtually none of the short-
cutting is in the antenna calculations of NEC based programs.
There are shortcuts in ground calculations because EZNEC and
other NEC based programs treat the ground as a homogeneous
medium. In truth, soil characteristics vary widely with depth and
Whenever there is a shortcut, there is potential for notable error. I
do not have great confidence in the ability to accurately calculate
loss of conductors very near earth. Some real world data seems to
bear that out, although data is sparse.
> Again, I am not against using EZNEC for a general idea of how an
> antenna array might work. But I have a serious problem believing
> EZNEC has all the answers and much prefer to hear or read about actual
> side-by-side antenna comparisons. I believe it's the difference
> between "projected performance" and "actual real life
There are far more errors in using S meters, and making actual FS
measurements, than most people realize or are willing to admit.
Too many errors to talk about even.
No wonder some think they have supergain antennas that break
the rules of physics. It is often difficult to accurately know if one
antenna is actually better than another, let alone determine what
the dB difference is!
My favorite example is a test I did on 75 meters between a G5RV
and a dipole. The dipole won easily in dozens of on the air reports
when I announced which antenna was which during the test.
Problem was, I wasn't changing anything at all except what I told
the other guy. When a few people couldn't see the change on an S
meter, they told me the dipole audio was better!
73, Tom W8JI
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com