On 8/28/01 10:22 PM, Mike Gilmer - N2MG at firstname.lastname@example.org wrote:
>It appears that they (Rohn) want four vertical #6
>rebars (one near each corner) with horizontal ties of
>#3 every 12 inches.
>The drawing shows each horizontal tie as being one
>continuous piece of rebar wrapped around the
That's probably the easiest way to do it.
>Is there a significant difference in the
>strengths of these two arrangements?
I don't see where you find the second arrangement. The horizontal rebar
is typically one continuous piece.
> Looks to me that
>having separate bars would be far easier to construct
>although using them would likely yield a somewhat
>less stable cage - at least when out of the concrete.
You've obviously never had to cut rebar.
I made mine entirely out of #4. It's much easier to bend the rebar around
in a square than it would be to make all those cuts.
Bill Coleman, AA4LR, PP-ASEL Mail: email@example.com
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com