[Top] [All Lists]

[TowerTalk] Quad Element Tuning

To: <>
Subject: [TowerTalk] Quad Element Tuning
From: (
Date: Sat, 8 Sep 2001 19:01:15 -0600
On Sat, 8 Sep 2001 writes:
> This 12/10M interference is a puzzling concept.  In all the 5 band 2 
> element  tune ups I've done in Eznec I've been able to get clean 
> patterns  adjusting  the reflectors on every band.  So has the W6 
> that had a 2 element 5  band quad  in QST.  

> If 12M affects 10M, why doesn't 15M affect 12M, 17M affect 15M 
> and  20M affect 17M?  Or the reverse?  



The reason that 12M parasitic elements interact with
other bands more than any other combination becomes
when you compare the % difference between bands.

28 / 24.9 =     1.1245 for a 12.45% difference

24.9 / 21.45 =          1.16  for a 16% difference

21 / 18.1 =     1.16 for a 16% difference

18.1 / 14.35 =  1.25 for a 25% difference

It is clear that on a percentage basis, 10 and 12 Meters
are closest in size.

Remembering that typical reflectors are 2 to 6% longer than 
self resonant elements and typical directors are 2 to 6% 
shorter than self resonant elements, we see that a 10M
reflector is nearly identical in size to a 12M director.

As we go lower in frequency, the differences are greater
and the interactions become less significant.

This analysis applies to Yagi antennas as well as to 
Quad antennas.

Tom  N4KG

Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>