Take the severed end and with a hammer flatten it in a similar fashion to the
original. Drill an appropriate sized hole and attach. The difference in length
will be almost insignificant to the match.
Tom Martin wrote:
> My tower project is coming along and should be completed before the snow
> flies which actually could be tomorrow here in the U.P.. In getting the
> 5 element 20 ready, I noticed that one of the Beta rods was broken an
> inch from the terminal that attaches to the boom. I had my welder try to
> fix it but the aluminum keeps exploding and he can't get a good weld.
> If it had broken somewhere down the length of the rod, it would be easy
> to repair. Any ideas out there short of ordering a new one from MFJ? I
> am coming to the end of my budget which has gone way past the 10%
> overage figure!
> 73, Tom W8JWN
Doug Renwick VA5DX
PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0
First VE5 2 x 5BDXCC and 160 M DXCC
What profit it a ham if he gains all the awards yet forfeits his soul?
I'll run the race and I will never be the same again.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com