Whoops, yes, I wasn't very informative. The mast is planned to be 80' high,
made of 4 steel 2" scaffold poles. It will be guyed at 4 levels, using
polypropylene rope. Each level will have 4 guys. It will be erected using a
gin-pole, of 30' length, pre-attached to the base of the main mast at 90deg.
No funds are available for rotators, so a yagi is out.
Does this help anyone to comment on my question ?
> Original Message From: <email@example.com>
> The solution to ANY problem begins with a COMPLETE and
> ACCURATE DESCRIPTION of the problem. You neglected to
> tell us anything about this mast or guys. It would be useful
> to know the material, >construction, size (width), etc to
> have a feel for what it can support. Would it hold a 3L Yagi? 2L?
> If not, a pair of inverted vees at right angles is a good solution.
> Pull the ends out as far / high as possible.
> The effective height of a Horizontally Polarized Delta Loop is
> roughly 1/3 of the it's height above the bottom wire which
> comes out to roughly 50 ft with the apex at 80 ft assuming
> an equilateral triangle. Better to go with the higher inverted vees.
> I worked my first 300 countries on 40M using various
> Rotary Dipoles at 80 ft. The feed impedance of a 40M dipole
> at ~90 ft goes through a minimum (roughly 5/8 WL) which
> means that the current (and therefore field strength) will be a
> maximum at the associated peak waveangle. The net result
> is that you need to go much higher before you realize further
> benefit ( with a dipole antenna) .
> Tom N4KG
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com