Rohn says they no longer make TB55D torque bars for use with the GA55GD guy
bracket. Does anyone know have dimensions for these torque bars so I can
make my own, or know where I can buy some. Even approximate dimensions
would be helpful to me - like, how long are they? One foot, two feet, three
feet? I'm guessing two feet would be about right.
I could also use information and dimensions on the Torque Arm Lugs for the
TA55 Channel Torque Arm. The lugs are on the Rohn print, but I haven't been
able to get any information from Rohn about them. I imigine the lugs are
needed if the torque arm assembly is mounted in the middle of the section.
The lugs would provide a bearing surface for vertical downpull on the torque
arm assembly. Do they attach with u-bolts?
Mike Rauh, NV7X
Reply to email@example.com
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com