In a message dated 10/2/01 8:21:19 PM Pacific Daylight Time, firstname.lastname@example.org
> By the M2 rotors I assume you're discussing the OR2800DC? If so
> it'll fit inside the top section of a HDX-579, but you must insist on
> the circular drive plate modification. The drive plate usually is
> configured in an ovoid shape, which won't let it turn inside the top of
> the HDX-589.
> The factory can make the modified drive plate, or a friendly
> machinist can make the oval a round plate..or if you're deft with a
> sawz-all you can do it yourself.
Actually there are two mast clamp plates available for the Orion; a 6"
round one and a 6"x9" version. The round one will take up to a 2" mast; the
oval one will handle up to 3". The factory can provide either version - just
BTW M2 has recently moved. It's been traumatic and they're not fully
operational yet so if you're waiting for something from them, it may take a
little longer. The new address is on their website. Phone number is the same.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com