Look in your Yellow Pages under FASTENERS.
Surely you will be able to find a supplier who will
sell you the SS hardware you need. BTW, I went
to 3/4 inch bolts instead of the supplied 1/2 inch
for my upgrades. Makes assembly of used / bent
element to boom brackets MUCH easier.
On 3 Oct 2001 Mike Gilmer - N2MG <firstname.lastname@example.org> writes:
> Has anyone purchased recently the stainless steel h/w kits Hygain
> used to sell for "upgrading" older beams? I contacted MFJ a few
> months ago and they didn't seem to know what I was talking about.
> I'm particularly interested in the kits for the monobanders (105,
> 205, etc.)
> I've been thinking of buying the bolts from a dealer like Fastenal,
> however, they have 50 or 100 piece minimums. Except for the 1/4-20 x
> 3/4" boom-to-element bolt assemblies, I don't sure don't need that
> Mike N2MG
> PeoplePC: It's for people. And it's just smart.
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower
> Trylon Titan towers, coax, hardline and more. Also check out our
> supporting towers up to 100 feet for under $1500!!
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com