[Top] [All Lists]

[TowerTalk] Rebuilding Ham M Rotor

To: <>
Subject: [TowerTalk] Rebuilding Ham M Rotor
From: (
Date: Fri, 5 Oct 2001 06:41:39 -0600
On Thu, 4 Oct 2001 writes:
> On Thu, 4 Oct 2001 10:59:34 -0700 (PDT) Anthony Bowyer 
> <>
> writes:
> > 
> >   Those of you who rebuild your own rotors, do you
> > paint the base of the brake housing, the part that
> > mount on a plate or has the lower mast support
> > attached?
> > 
> I never have becasue I haven't seen any corrosion at the base.
> I have though, given the terminal strip a coat of clear Krylon(R) to  
> retard corroision there.  I remove the wires, tighten the screws,
> and spray light coats.
> 73,
> Charlie, N0TT

I replaced the screws in my rotor terminal strips 
with longer STAINLESS STEEL screws.

Tom  N4KG

Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>