[Top] [All Lists]

[TowerTalk] Rohn and Stacks

To: <>
Subject: [TowerTalk] Rohn and Stacks
From: (
Date: Mon, 8 Oct 2001 11:30:27 EDT
In a message dated 10/7/01 8:58:55 PM Pacific Daylight Time, 

> PS: also remember that a C4-XL, for example, at the top is not the same as 
>  one half the height.

    Do you mean that it exhibits less load when it's not at the top of the 
tower? The Rohn spec is for TOTAL tower loading but 90% of installations are 
headload (at the top).

    One of the things you need to remember is that the specs in the Rohn book 
for 45G on up have DEDUCTED 8 sq.ft. for a symmetrical antenna mount (look 
under "General Notes" on the tower configuration pages). This is a common 
appurtenance for commercial applications so feel free to add the 8 sq.ft. 
back into your tower capacity.

    Also, all towers are designed for a certain amount of overhead or safety 
factor so, yes, they will take more than their stated capacity. But the 
overhead is quickly gone when you get a high gust over your design speed 
(wind pressure is NOT linear).

    Anecdotal information also indicates that 45G and 55G will take just 
about anything you can throw at them. But I'll never talk someone out of 
over-engineering something and general tower construction conservatism. 

Steve     K7LXC
Tower Tech 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>