The explaination, as far as I know is correct. However, it does not tell
me anything. How do I tell if my antennas is fed what way? In other words
how do I tell if it is a current feed or votage feed, where are the nodes
or loops. From a diagram of a dipole (resonant, not an end fed or a duplex
antenna) it is a current fed with the current max at centre with the feed
at the centre. However, when not resonant this changes.
Chris opr VE7HCB
At 08:42 AM 2001-10-15 -0600, email@example.com wrote:
>For more information on Long Wire antennas
>(the dipole is a subset of L.W. antennas)
>see the Antenna Fundamentals chapter (2)
>in the Old (1970's) ARRL Antenna Books,
>especially the sections on Antenna Impedance
>and Harmonically Operated Antennas.
>Basically Current Feed is when the feedpoint
>is a Current Node and Voltage Feed is when
>the feedpoint is a Voltage Node.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com