> I never solder the shield to the connector. I just cut the outer jacket
> and screw the connector on to the shield and solder the center conductor.
> Been doing it for 30 years and have not had a problem no matter what
> connectors I use.
> This way they are also VERY easy to re use.
Just curious if you operate QRO with those? Tnx
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com