I certainly am not having this problem. I can only think of 2 things that'd be
wrong. Either not enough heat or maybe you're using some of that new lead free
solder. A PL259 can sink quite a bit of heat so use a big iron and also be sure
to use a good quality solder with lead. I've never mastered the lead free
stuff. I think it takes a special flux.
Eddy Avila wrote:
> Hi all,
> When I was a young ham in the 60's I never ever had any problems assembling
> PL259 connectors, particularly when it came to soldering them to the coax.
> I'm sure I never used anything hotter than a 100-watt gun!! I'd simply heat
> up the connector then apply some solder and voila! It was that easy.....
> But now, no matter what I buy, cheap or expensive silver-tinted PL259 and
> using a 250watt gun I'm finding it very difficult to get solder to "stick"
> to these crap connectors....getting really frustrated trying to get solder
> to adhere to PL259's now!!!
> Can someone recommend (without hesitation) a source of good-quality
> connectors that can take solder like they used to?
> thanks much!
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com