I believe that may be a giant leap you are making to assume that the
top of the 45G will support 20 square feet in a 90 mph condition. If
you are going to make a leap like that, why did you not address the
loading of the various feedlines Rohn allows for on their design?????
Personally I would be very scared to make that quantum leap and
assumption because I do not believe it is correct.
J. Leon Pringle, Jr. W 5 N A
----- Original Message -----
From: "Jeffrey Okamitsu" <email@example.com>
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Tuesday, October 23, 2001 8:13 PM
Subject: [TowerTalk] Maximum Wind Load on Rohn 45G Towers
> Thanks for reading this email.
> I am in the process of putting up two 130 foot Rohn 45G towers as
> Rohn's 90 mph specifications. Maximum allowable projected area at
> top of the tower, as specified by Rohn, is 12.3 square feet for
> antenna members.
> The question I have is this: if you read the notes in the
> drawing for the 90 mph specs, it states (note 4) "Tower designs
> three side arms, symmetrically placed, having a total effective
> projected area equal to 8.0 square feet."
> Does anyone agree with my conclusions that this implies that if the
> arms are NOT used, the maximum allowable project area at the top of
> tower is actually 20.3 square feet?
> Let me know what you think.
> 73...Jeff, KN2R
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower
> Trylon Titan towers, coax, hardline and more. Also check out our
> supporting towers up to 100 feet for under $1500!!
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com