OK here is the problem... I just finished my C31XR. Its setting on a 75ft
Aluma crank-up. I have a 13b2 cc about 3.5 ft above it with a Diamond
triband vertical(6,2,440) above that. Its being fed with 100ft of 9913f
(brand new). I measured it at 25 ft and up about 60ft and the results were
the same measuring with a MFJ 269
20.78 3:1 (lowest for 15mtrs)
14.15 2.2:1 (lowest for 20mtrs)
I took about a week to assemble it and made sure of every measurement. The
only thing that is not up is the truss assembly.
Can anybody point me in the right direction to start with.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com