Towertalk
[Top] [All Lists]

[TowerTalk] Stuck Elements

To: <towertalk@contesting.com>
Subject: [TowerTalk] Stuck Elements
From: realex@flash.net (Bob Alexander)
Date: Sat, 3 Nov 2001 07:31:32 -0600
I recently disassembled an old Hygain DB1015 that had elements thouroughly
stuck
together by pouring some hydrogen peroxide over the joints in question.  It
will loosen or
break up the oxidation holding the joints together.  Repeat  as needed
73, Bob, W5AH

-----Original Message-----

I picked up a Telrex 20M646 which I am working on adjusting the element
lengths. Many of the elements are tight and will not budge. I have tried a
number of things to get the element end loose with no success. Has anyone
else experienced the same problem and found a solution?




List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>