[Top] [All Lists]

[TowerTalk] Dissimilar Metals?

To: <>
Subject: [TowerTalk] Dissimilar Metals?
From: (
Date: Fri, 11 Jan 2002 10:23:52 EST
In a message dated 1/10/02 10:22:37 PM Pacific Standard Time, 

> Brass and copper is "OK", but I avoid it.  I usually use stainless steel as
>  the transition metal between two dissimilar metals.  That stainless steel 
>  usually a bolt/washer/nut combination.

    That's why Polyphaser makes a hose clamp with a little pad of SS for 
clamping a copper ground wire to a galvanized zinc round tower leg using the 
SS pad in-between the two dissimilar metals.

Steve    K7LXC
Tower Tech 

This list is sponsored by the new Store.  When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list.  Check it out at

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>