[Top] [All Lists]

[TowerTalk] Burying radials and/or coax

To: <>
Subject: [TowerTalk] Burying radials and/or coax
From: (Don Havlicek)
Date: Thu, 07 Feb 2002 22:47:34 -0500
If you'll read down carefully, you'll see that I said: 

> The tubing through which the cable/wire runs is simply placed through
> holes of corresponding size drilled through the bed of 2x12's [rear-most
> one], and at a slight angle to the rear with the 'blade' of [in my case]
> stainless steel [not aluminum panel - that was the first one!].  This
> 'blade' is bolted to the middle 2x12 by two pieces of 1/8" aluminum
> stock that is bolted through the middle 2x12.


Where do you get ICE bandpass filters & beverage matching boxes?  The
same place that pays for the hosting of this list:  The eHam Store.
Order online at

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>