Towertalk
[Top] [All Lists]

[Towertalk] SS U Bolts

To: <towertalk@contesting.com>
Subject: [Towertalk] SS U Bolts
From: w7ni@easystreet.com (Stan & Patricia Griffiths)
Date: Tue, 26 Feb 2002 13:12:44 -0800
You might try looking at the hardware on my web page.  It is not stainless
but it is mechanically galvanized, which I think is better since it does not
suffer from the famous stainless galling and siezing problem . . .

Try this URL for a verbal description and pricing:
http://www.reprise.com/antronics/antronics_hardware.asp

Try this URL for a table of dimensions:
http://www.reprise.com/antronics/antronics_hardware_table.asp

Try this URL for a detailed description of what "mechanical galvanizing" is:
http://www.reprise.com/antronics/about_antronics_hardware.asp

Stan
w7ni@easystreet.com

----- Original Message -----
From: "Joe Simpkins" <K4MD@carolina.rr.com>
To: <Towertalk@contesting.com>
Sent: Tuesday, February 26, 2002 7:41 AM
Subject: [Towertalk] SS U Bolts


> Any good current sources for these in sizes that will fit 2" or bigger
> pipes? 5/16" stock is a present need.
> Thanks,
> Joe K4MD
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


<Prev in Thread] Current Thread [Next in Thread>