Sorry, wrong VFO :)
----- Original Message -----
From: "Mike" <W4EF@dellroy.com>
To: "TowerTalk" <email@example.com>; <W8JI@contesting.com>
Sent: Thursday, February 28, 2002 3:03 AM
Subject: [Towertalk] Re: [CQ-Contest] FT1000MP band data
> Check with the RF Connection
> He has the special Kenwood DIN plugs that are used for the transverter,
> external receiver antenna, remote VFO, etc. As has been mentioned the
> radio shack parts have the wrong pin spacing. His prices are very good
> ($1.50) and when I talked to him on the phone he seemed to know which
> plug I needed off the top of his head . He can probably tell you what if
> differences there are between the Kenwood and the Yaesu plugs.
> 73 de Mike, W4EF.........
> ----- Original Message -----
> From: "Tom Rauch" <firstname.lastname@example.org>
> To: "William H Hendrick" <email@example.com>;
> <firstname.lastname@example.org>; "k8cc" <email@example.com>
> Sent: Wednesday, February 27, 2002 9:04 AM
> Subject: Re: [CQ-Contest] FT1000MP band data
> > > The Yaesus and Kenwoods that have 8 pin DIN plugs are indeed a special
> > > size. The problem, I believe it the positioning of the pins across
> > > the side with the index notch. The Radio Shack connectors will not
> > > fit (however, I think they do fit ICOMs).
> > The kenwoods are a special size also??? Are they the same as a
> > Yaesu?
> > 73, Tom W8JI
> > W8JI@contesting.com
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
> Towertalk mailing list