I have one 3/4" hardline splice that I used a barrel connector on and I had
to redo it every few years until I started filling the inside with spark
plug grease. That seems to really help out because I haven't touched that
connection in about 5 years now. I use a regular barrel with some short
slit pieces of 3/4" aluminum tubing over the barrel and then an overall
piece (or maybe 2) of 7/8" tubing over both ends of the hardline and
barrels, clamped with hose clamps.
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of firstname.lastname@example.org
> Sent: Monday, June 03, 2002 4:40 AM
> To: TOWERTALK@contesting.com; email@example.com
> Subject: [Towertalk] Re: CATV Hardline Splices
> Most of my Barrel Connector adapters failed after a few years
> for various reasons.
> One of my longest lasting splices was made by cutting down the
> hardline, exposing ~1/2 inch of center conductor from each side,
> slipping a short piece of 1/4 inch copper tubing over the center
> conductors, soldering, filling in gap with insulation and using a
> sleeve of aluminum tubing with hacksawed splits in the ends,
> 1/8 inch larger than the hardline jacket, taped ends, hose clamped
> over each side of the splice. Be sure to put the outside splice over
> one side BEFORE soldering the center conductors together :-) !
> Tom N4KG
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> Towertalk mailing list