[Top] [All Lists]

[Towertalk] KT34XA QUESTION

To: <>
Subject: [Towertalk] KT34XA QUESTION
From: (Guy Olinger, K2AV)
Date: Mon, 10 Jun 2002 10:12:04 -0400
Noll, W9RN, posed the original question, not I. I support the upgrade.


----- Original Message -----
From: <>
To: <>; <>
Sent: Monday, June 10, 2002 7:44 AM
Subject: Re: [Towertalk] KT34XA QUESTION

> Guy-
> I don't think you can just use the new dimensions. There are other
changes (mechanical) which can affect trap resonant frequencies. A
call to Mike at M2 will give you all the info you need.
> I have had several 34's & 34XA's, and now have a KT36XA. Believe me,
if you saw the mechanical improvements on the new stuff, you'd
upgrade. Far superior.
> If you don't upgrade, I suggesst you pop rivet the shorting straps
at the outboard end of the trap assembly (15 m section). Drill and use
a small rivet on the bottom side at both ends of the strap. I found
this to be the worst mechanical connection in the old design. I would
NOT recommend riveting anything on the capacitor tubes, due to
shorting/arcing possibilities.
> 73,
> Tony, K1KP
> _______________________________________________
> Towertalk mailing list

<Prev in Thread] Current Thread [Next in Thread>