Anyone wishing to do serious yagi Windload work should consider yagi stress.
It answers all the questions. http://yagistress.freeyellow.com/
I use it in all my home built yagies.
----- Original Message -----
From: "jljarvis" <email@example.com>
Sent: Saturday, 06 July, 2002 14:02
Subject: [Towertalk] Estimation of yagi windload
> In thinking about Eric's question of windload on a helix,
> I came to realize I'd never seen a thorough approach to
> windload on a yagi.
> * Does anyone have a reference to a published analysis?
> * Thinking about it:
> * To what degree are 'hidden' elements shadowed by
> those before them? It probably depends on windspeed
> and element diameter, as well as spacing.
> * My guess is, "not at all", in which case, one sums
> the exposed area of the elements and degrades that by
> whatever the flat/round factor is. (.70?)
> * Further, I suspect that maximum exposed area occurs
> around 45 degrees, where one takes .707 of the exposed
> boom area, plus .707 of the exposed elements area,
> each multiplied by the flat/round factor, and then summed.
> I suspect a search in the IEEE journal might yield something;
> that's my next step.
> Has anyone seen reference to wind tunnel studies, in support
> of mathematical models/approximations?
> Jim Jarvis/N2EA
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> Towertalk mailing list