On 5/31/02 9:25 AM, N2TK at email@example.com wrote:
>You don't pull the shied through the 4 holes. You first tin the shield then
>install the PL-259. Then you solder the tinned shield through the 4 holes so
>that you have a good electrical connection.
You know, the problem I often have with this technique is that I cannot
put the connector barrel on to the RG-213 if there's too much tinning.
The coax tends to twist and distort, and I can't really grab it with
pliers without damaging it.
So, what's the best way to put a PL-259 connector on? How do you hold to
coax still while rotating the connector barrel?
Bill Coleman, AA4LR, PP-ASEL Mail: firstname.lastname@example.org
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901