First learn to do a real thin smooth tinning job and trim the end of it
fairly smooth so it doesn't hang up on the threads or lip inside the
pl259. then a SMALL dab of silicone grease on the cut end of the outer
jacket does a good job of lubricating the threads as you screw the body
of the pl259 on to the coax.
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:towertalk-
> email@example.com] On Behalf Of Bill Coleman
> Sent: Thursday, July 11, 2002 21:32
> To: firstname.lastname@example.org; email@example.com; 'Tower Talk'
> Subject: RE: [Towertalk] Re: Coax Connector Losses - Does anyone know?
> On 5/31/02 9:25 AM, N2TK at firstname.lastname@example.org wrote:
> >You don't pull the shied through the 4 holes. You first tin the
> >install the PL-259. Then you solder the tinned shield through the 4
> >that you have a good electrical connection.
> You know, the problem I often have with this technique is that I
> put the connector barrel on to the RG-213 if there's too much tinning.
> The coax tends to twist and distort, and I can't really grab it with
> pliers without damaging it.
> So, what's the best way to put a PL-259 connector on? How do you hold
> coax still while rotating the connector barrel?
> Bill Coleman, AA4LR, PP-ASEL Mail: email@example.com
> Quote: "Not within a thousand years will man ever fly!"
> -- Wilbur Wright, 1901
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
> additional 5 percent off
> any weather station price.
> Towertalk mailing list