We use Chicago style grips from Klien to hang onto the guy wires while
----- Original Message -----
To: <email@example.com>; <firstname.lastname@example.org>
Sent: Saturday, July 13, 2002 3:25 PM
Subject: Re: [Towertalk] Guy Wire Tensioning-WAS Lost My Tower
> In a message dated Fri, 12 Jul 2002 9:38:49 PM Eastern Standard Time,
> > The question of the moment is, what is a good way to grip 3/16 guy wire
> > a come-along to get the initial tension on it? I plan on using preforms
> > the guys if that has any bearing on methods.
> The easiest thing is to use one PreForm as a temporary and then
> just throw it away when you're done. Just hook the comealong to it -
> you don't have to wrap it the whole way.
> > Have been looking at
> > McMAster-Carr ( http://www.mcmaster.com ) and find both smooth and
> > jaw grips. Not sure I like the thought of the knurling biting into my
> > new guy wire but maybe it is not a significant bite ?? There is also a
> > smooth jaw model which, for some reason, costs about $15 more ($48 vs
> > catalog price). Search for " Sure-Clamp Wire and Cable Grips " to see
> > I'm referring to. Maybe there is something as good or better for less $$
> > Homebrew methods? Your thoughts appreciated.
> The aforementioned Klein cable grip is a good method (they're
> at www.championradio.com). I have 3 and 3 comealongs so have one on each
> then it's pretty easy to pull the tower into plumb.
> > Also, I picked up one of those 16 inch laser levels Radio Shack had on
> > last month ($20) and am thinking that would be a dandy way to
> > straighten/align the tower - no worries about the wind moving a plumb
> > around, etc. Haven't really thought about a mount for the level and a
> > for it but shouldn't be too tough. Am I missing any obvious reasons for
> > making a mount for the level (up the tower) and an identical mount for a
> > inch or so target that would mount near the bottom of the tower? Would
> > to have some sort of mount that would force the brackets to mount square
> > the sections of tower they are fastened to (i.e., if mounted to the same
> > section of tower, the alignment between the laser level and the target
> > be right-on just by bolting them in place). Even if I'm off the target
> > initially, the spot would be easy to see on the concrete.
> > More thoughts?
> Sounds like more work than it's worth IMO. You only need to plumb at
> points. Once the guys are attached, have the climber on the tower use a
> on the leg to direct the ground crew how much to click the comealong or
> turnbuckle to get it plumb.
> Once you've got the first set of guys on, sight up the tower face. Any
> lean will be obvious. You can then plumb the tower from the ground or use
> A guyed tower can be out three inches in 100 feet and still be within
spec so you
> don't have to get it *exactly* plumb.
> Steve K7LXC
> TOWER TECH --
> Professional tower services for commercial and amateur
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> Towertalk mailing list